In order to adapt to the physical and chemical conditions of various industries, industrial hoses usually have very strict standards for the chemical raw materials and processes of the inner and outer colloids. According to the classification of transfer medium, mainly including: 1. Water hose. Use

Factors Influencing hose quality: 1. Working pressure: Dynamic Stress means the highest pressure at continuous working situation. And according to related standard, we recommend the pressure is should be 1/3 or 1/4 of the lowest bursting pressure. 2. Rubber hose size: Inner diameter should be proper

The so-called rubber hose, as the name suggests, is a hose product made of rubber. Although the rubber hose does not have the hardness of steel pipe and other types of plastic hose, the soft rubber hose is still widely used in modern construction and industrial. closely related to its superior perfo

About Special Property rubber hoseProduct nameInside Diameter mmPerformance and UsesRemarkSteam hose6 - 76Pipe saturation steam or overheating water below 232℃。 Working pressure 0.7MPA to 1.7MPA. We will choose resonable reinforcement according to different working pressure and temperature.Oil tran

First, the appearance of inner rubber: this is the characteristic of pure EPDM, which is relatively Matt finish, not bright in appearance and low in strength. Our solution is to change the proportion of our formula and add natural rubber, which will make the appearance smooth and bright, and the str

1. Please select the hose fitting suitable for the size of the hose.2. When inserting the tail part of the joint into the hose, apply oil on the hose and the tail of the hose, and do not bake it with fire. If it cannot be inserted, insert the connector after heating the hose with hot water.3. Please